One Clinton Street Passes Halfway Mark Above Brooklyn Heights

One Clinton Street, design and render by Marvel ArchitectsOne Clinton Street, design and render by Marvel Architects

Since we last checked up on One Clinton Street, back in late August, it was only about nine stories above street level. Now, the 36-story residential tower is climbing past the halfway mark on its way to a 409-foot pinnacle. The Marvel Architects-designed skyscraper is being developed by Hudson Companies, and will span 295,000 square feet when finished. The triangular-shaped property sits at the northern confluence of Cadman Plaza West and Clinton Street, and is also known as 280 Cadman Plaza. Located in Brooklyn Heights, the building will have 134 units and 114 off-site affordable units. One Clinton Street Library will be built on the lower floors, replacing the site’s formerly extant Brooklyn Heights Library.

One Clinton Street looking west. Photo by Michael Young

One Clinton Street looking south along Cadman Plaza West. Photo by Michael Young

Looking at the construction site, the entire structure is being built with reinforced concrete featuring eight structural concrete columns on each wide flank of the triangular-shaped building. In between, secondary perimeter columns have been built from large cinder blocks that form and divide the distance between the original concrete columns. This breaks up the facade into a total of 18 openings that will hold and support each of the 18 windows that line the eastern and western faces.

The facade being built up on One Clinton Street. Photo by Michael Young

The northern facade of One Clinton Street. Photo by Michael Young

The facade will cover and disguise the additional exterior columns with vertical light-colored panels that visually divide the building into sections of two and three floors, breaking up the large eastern and western frontages. On the ground floor, The Brooklyn Roasting Company will partially occupy the retail section, along with Smorgasburg-selected pop-up food vendors. These will share the same floors as the new library and STEM research center, which will take up about 9,000 square feet.

One Clinton Street from street level, design and render by Marvel Architects

One Clinton Street will top off sometime early next year, with completion and opening of the building expected sometime around 2020.

Subscribe to YIMBY’s daily e-mail

Follow YIMBYgram for real-time photo updates
Like YIMBY on Facebook
Follow YIMBY’s Twitter for the latest in YIMBYnews

.

4 Comments on "One Clinton Street Passes Halfway Mark Above Brooklyn Heights"

  1. Please pardon me for using your space: Do you like clown fish’s design?
    (Thanks to Michael Young)

  2. Fake columns of cinder blocks? Covered up with panels? Something’s wrong with that.
    Or is it common practice?

  3. This looks like cinder blocks, plus they are just division between windows, while it’s concrete column carcasse as usual. Main loads came on true concrete, while these cinder blocks between are just division on facade between windows, 3 windows per concrete column space on facade. And after all bricks will cover whole building facade.

  4. Yeah I watched some idiotic channel on YouTube from Russian idiot truck driver who lived in Canada who often go with his truck to US, he complained that in America most low rise construction are made from timber and fake cheap materials, what is really far away from true. But his Russian auditorium believed that concstruction in America is made from unsafe fire hazard materials. They are stupid morons, and modern materials yes they can be looks light and cheap, but why then Japan plan to built fully timber skyscraper 70 floors and over 1100 feet high!???

Leave a Reply to Jack Liberman Cancel reply

Your email address will not be published.


*